Self service - packing | No |
Width (mm) | 80 mm |
Voltage V AC (min) | 0 V AC |
with battery / rechargeable battery | Yes |
height (mm) | 45 mm |
Voltage V AC (max) | 600 V AC |
Battery type (IEC designation) | 2x AAA batteries |
Overall length (mm) | 150 mm |
Voltage V AC min – max | 0 - 600 |
Battery designation | R03 |
Voltage V DC (min) | 0 V DC |
Battery manufacturer | Pairdeer industrials |
Voltage V DC (max) | 600 V DC |
Battery voltage (V) | 1.5 V |
Voltage V DC min – max | 0 - 600 |
Battery capacity (mAh) | 1300 mAh |
Current A AC | 10 A AC |
Battery capacity (Ah) | 1.3 Ah |
Current A DC | 10 A DC |
Battery weight (g) | 8 g |
Resistance (MΩ) | 40 MΩ |
Total weight battery in product (g) | 16 g |
Watt/hour (w/h) | 1.95 w/h |
Battery included in package? | Yes |
Frequency (MHz) | 5 MHz |
"Battery" or "cell" | Battery |
Number of cells | 2 |
Capacity (nF) | 100 nF |
True RMS | No |
Measurement range selection | automatically |
Remote voltage test | No |
Data HOLD | Yes |
Relative value measurement | Yes |
Battery status display | Yes |
Background illumination | No |
Min. measurement | No |
Max. measurement | No |
Acoustic signal | Yes |
Measuring category | CAT IV 300 V / CAT III 600 V |
Display | 4,000 digits |
Protection class IP | IP40 |
Fuse | F 400 mA / 600 V Ceramic 6,3 x 32 mm and F 10 A / 600 V Ceramic 6,3 x 32 mm |
Temperature measurement | -20 - 500°C |
Diode test | Yes, up to 2V |
Operating temperature min - max (°C) | 0 - 50 |
Storage temperature min (°C) | -10 °C |
Height above sea level | 2000 m |
Contamination level | 2 |
Increases your efficiency: All relevant measurement functions in a single measuring device.
Makes handling easier: Automatic measuring range setting saves the manual pre-selection.
Simplifies your work: Simplifies storage and relative value measurement and expedites the comparison of measured values.
Dimensions: 150 x 80 x 45 mm
Application: For multi-functional use in different application locations.
Measuring category: CAT IV 600 V
Standards:
600 V AC / 600 V DC
CAT IV 600 V
Current measurement 600 µA - 10 A
Automatic measurement range selection
Temperature measurement
High-voltage current measurement
Are you looking for a multimeter that covers the relevant measurement variables needed during the workday of an electrician? The digital multimeter from Wiha optimally equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible. A large LCD display makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. The relative value measurement offers another advantage. The storage of previous measurement values and their comparison to future measurement results allows a variety of control options. According to the measurement categories CAT III up to 600 V and CAT IV up to 300 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations.
IEC/EN 61010-1, IEC/EN 61010-2-033, IEC/EN 61010-031, IP 40, CE, GS