Tool for electrics | No |
Self service - packing | No |
ESD article | No |
Width (mm) | 110 mm |
Voltage V AC (min) | 12 V AC |
with battery / rechargeable battery | Yes |
height (mm) | 50 mm |
Voltage V AC (max) | 1000 V AC |
Battery type (IEC designation) | 2x AAA batteries |
Overall length (mm) | 282 mm |
Voltage V AC min – max | 12 - 1000 |
Battery designation | Zinc / Carbon Battery ZN/C |
Voltage V DC (min) | 12 V DC |
Voltage V DC (max) | 1500 V DC |
Battery voltage (V) | 1.5 V |
Voltage V DC min – max | 12 - 1500 |
Battery capacity (mAh) | 1300 mAh |
Battery capacity (Ah) | 1.3 Ah |
Battery weight (g) | 8 g |
Total weight battery in product (g) | 16 g |
Watt/hour (w/h) | 1.95 w/h |
Battery included in package? | Yes |
"Battery" or "cell" | Battery |
Frequency (Hz) | 400 Hz |
Number of cells | 2 |
Handle diameter (mm) | 28.5 mm |
Remote voltage test | No |
ATEX approval | No |
Photovoltaic-compatible | No |
eMobility-compatible | Yes |
Acoustic signal | Yes |
Integrated flashlight | No |
FI check | No |
Measuring category | CAT IV 1.000 V |
Display | LCD |
Protection class IP | IP64 |
Rotation field indication | LED L, R |
Continuity check | LED and audible tone |
Operating temperature min - max (°C) | -15 - 40 |
Storage temperature min (°C) | -20 °C |
Height above sea level | 2000 m |
Single-pole phase test | 100 V AC |
Einpolige Phasenpruefung max (V AC) | 700 V AC |
Einpolige Phasenpruefung min - max (V AC) | 100 - 700 |
Rotation field test | 170 - 1,000 V phase to phase |
Permeability test | Measuring range 0 - 500 kΩ + 50% |
LED ELV display | > 50 VAC, > 120 V DC |
LCD range | 4-digit LC display |
LCD resolution | 1 V |
LCD precision | +/- 3 %, +/- 3 digit |
LCD overflow display | OL |
Inherent time (s) | 1 s |
Safety circuit (mA) | Is < 3.5 mA (at 1,000 V) |
Measuring mode | 30 s ON (operating time), 240 s OFF (recovery time) |
Battery consumption (mA) | 80 mA |
Humidity RH max (%) | 85 % |
Contamination level | 2 |
Simplifies your work: Illuminated LC display, LED scale and signal sound for easy to read measurement results.
Simplifies your work: Quick one-hand testing on power sockets due to the 19 mm contact distance.
Increases your flexibility: Two-pin voltage tester covers a large voltage range from 12 - 1,000 V AC, as well as 12 - 1,500 V DC.
Dimensions: 240 x 75 x 30 mm
Application: To ensure electrical isolation.For voltage testing, flow testing and rotational field testing.Also suited for testing hybrid and electric vehicles as well as photovoltaic systems.
Measuring category: CAT IV 1.000 V
Standards:
Suitable for eMobility
Suitable for photovoltaic systems
12 - 1.000 V AC / 1.500 V DC
Cat IV, 1,000 V
One-handed test
Rotary field measurement
Before starting work on live parts, it must be ensured that the system is electrically isolated. In addition to the standard work of electricians or electrical specialists, this now also applies to work on electrical cars and e-scooters, which is why the two-pole voltage tester is also part of 'every car repair workshop's basic equipment. Thanks to the large measuring range from 12 to 1,000 V AC or 1,500 V DC and compliance with the highest safety level CAT IV, the voltage tester is also suited for testing hybrid and electric vehicles as well as photovoltaic systems. Thanks to the illuminated LED display, during a measurement, the present voltage is 'shown' on an 8-level scale, as well as 'the' actual value in the illuminated LC display. The voltage and continuity tester additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition. In addition, it can be used for quick one-handed testing thanks to the integrated spacer. Due to the integrated 'measuring' point illumination, the two-pole voltage tester is also suited for work in poorly 'lit working' environments. For additional safety, a low battery charge is indicated directly on the LC display. It is complaint with the standards EN 61010-1 and EN 61243-3:2014.
IEC/EN 61010-1, IEC/EN 61243-3:2014, IP64, CE