Wiha Voltage and continuity tester 12 - 1,000 V AC, CAT IV incl. 2x AAA batteries (45216)

Home

Wiha Voltage and continuity tester 12 - 1,000 V AC, CAT IV incl. 2x AAA batteries (45216)

Home» Produse

Cod produs:
4010995452162

Pretul dvs. 89.25 €
(444.17 lei)

TVA inclus

Disponibilitate:

Informatii produs:

with battery / rechargeable battery	Yes
Self service - packing	No
Width (mm)	110 mm
Voltage V AC (min)	12 V AC
Battery type (IEC designation)	2x AAA batteries
height (mm)	50 mm
Voltage V AC (max)	1000 V AC
Overall length (mm)	282 mm
Voltage V AC min – max	12 - 1000
Voltage V DC (min)	12 V DC
Voltage V DC (max)	1500 V DC
Battery voltage (V)	1.5 V
Voltage V DC min – max	12 - 1500
Battery capacity (mAh)	1300 mAh
Battery capacity (Ah)	1.3 Ah
Battery weight (g)	8 g
Total weight battery in product (g)	16 g
Watt/hour (w/h)	1.95 w/h
Battery included in package?	Yes
"Battery" or "cell"	Battery
Number of cells	2
Remote voltage test	No
ATEX approval	No
Photovoltaic-compatible	No
eMobility-compatible	No
Acoustic signal	Yes
Integrated flashlight	Yes
FI check	Yes
Measuring category	CAT IV 600 V / CAT III 1.000 V
Display	LED
Protection class IP	IP64
Rotation field indication	LED L, R
Continuity check	LED and audible tone
Operating temperature min - max (°C)	-15 - 50
Storage temperature min (°C)	-20 °C
Height above sea level	2000 m
Single-pole phase test	100 V AC
Einpolige Phasenpruefung max (V AC)	700 V AC
Einpolige Phasenpruefung min - max (V AC)	100 - 700
Rotation field test	170 - 1,000 V phase to phase AC 50/60 Hz
Permeability test	Measuring range 0 - 500 kΩ + 50%
LED tolerances	according to EN 61243-3
LED ELV display	> 50 VAC, > 120 V DC
LCD range	X
LCD resolution	X
LCD precision	X
LCD overflow display	X
Inherent time (s)	< 0.5 s at 100 % of the nominal value
Safety circuit (mA)	Is < 3.5 mA (at 1,000 V)
Measuring mode	30 s ON (operating time), 240 s OFF (recovery time)
Battery consumption (mA)	80 mA
Humidity RH max (%)	85 %
Contamination level	2

Documentatie tehnica:

Documentatie tehnica

Detalii produs

Simplifies your work: Quick one-hand testing on power sockets due to the 19 mm contact distance.

Simplifies your work: An integrated flashlight function ensures optimal illumination.

Meets your requirements: Checking the FI trigger by means of two load buttons.

Dimensions: 240 x 75 x 30 mm

Application: To determine zero voltage.

Application: For standardized voltage testing, continuity testing, rotational field testing incl. FI protective switch measurement.

Measuring category: CAT III 1.000 V / CAT IV 600 V

Standards:

Suitable for photovoltaic systems

12 - 1.000 V AC / 1.500 V DC

CAT III 1.000 V / CAT IV 600 V

One-handed test

Rotary field measurement

FI load buttons

Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of a convenient range from 12 V to 1,000 V AC or 1,500 V DC. In addition, it can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. LED display ensures easy to read measurement results. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1,000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations.

IEC/EN 61243-3:2014, IP64, CE

Produse similare